Our Products

85gsm CCK white

Tech Spec. No. TDS 205

Testing Procedure Measurement Actual Tolerance
Basic Weight JLTPL 311 g/m2 85 ±5
Caliper JLTPL 313 µm 75 ±5
Tensile Strength JLTPL 315 N/25mm 200 Min.180
Release Force FTM10 g/inch 15 05-25

CHARACTERISTIC

1. One side direct silicon coated CCK liner with medium release.

2. Easy with aggressive solvent acrylic and rubber based adhesive.

3. Also use with Solventless, platinum catalyzed silicon coated release liner.

4. It Provides a stable release and no release migration.

1. Best suitable as for Label Liner

2. Easy for Die Cut processing.

3. The best for over lamination for pressure sensitive adhesive coated Material

4. Better for high speed hologram dispersing.

Remarks

  • For best result Use or convert the product within 6-12 months from date of Manufacture.
  • To be noted that Typical value will not to be constructed as specification and Is only for your kind reference.
  • Suggest that Please store the siliconised material clean and dry under ambient conditions of temperature, humidity and away from direct sunlight, Heat, dampness and other sources of ignition.
  • Advice is that Please do not open the packaging, until and unless it has to be Taken for test prior to production.
  • At that time the liner is taken into production, user is responsible for Determining whether it is fit for a particular purpose, method of Application and service life of product.

Note

  • Results Very Close to Test method FTM10 23° C TESA 7475 tape.
  • Technical data document is for consumer.
  • Sample document is only for internal circulation and records.

Contact Us

  • Location:

    Plot No. G-704, Road No. 5,
    Telephone Exchange Road, Metoda Lodhika, G.I.D.C.
    Rajkot - 360021, Gujarat, India

  • Email:

    jaylabletech@gmail.com

  • Phone:

    +91 (281) - 2482820

    +91 97129 15522

Top